Ergonomics, Visibility and Optimization
Longer spraying days and nights and higher spraying speeds place heavier demands on comfort and easy operation.
ALPHA evo features a fine balance between front and rear and has a low total weight giving an optimal weight/capacity ratio and high performance even under wet field conditions. Also the high ground clearance from 120 to 165 cm gives a flexible usage from low to tall crops as sweet corn and sunflowers.
Optimizes visibility with 3-pillar design
The new large spacious EvoCab II is specifically developed by HARDI with its “3-pillar design”, which provides a new standard for visibility with more than 320° around the sprayer.
The cabin is equipped with a pressurisation system, a dust filtering of fresh air, an aerosol and vapor filtering to protect the driver and fulfill the Class 4 requirements.
The new climate control system has been tested intensively in climate chamber in order to bring highest driver comfort in warmest condition.
FloatRide suspension
By equipping the ALPHA with the optional FloatRide, the standard coil spring suspension is replaced by airbags. This ensures even more boom stability and maintains balance of the ALPHA in strong slope. The chassis’ height will be maintained whatever tank volume.
By allowing for individual wheel movement, the ALPHA provides a maximum comfort, even at high spraying speeds through a wheel travel of 185 mm.
Hydraulic Track width Adjustment
The ALPHA evo EcoDrive with FloatRide suspension can be equipped with Hydraulic Track width Adjustment. This Hydraulic Track width Adjustment axle allows a track width from 180 to 280 cm (depending on tire dimensions).
The driver will set his track width from the cab display and will be ready to drive. This will allow changing track width from the road to the field and from cereal crop to maize, row crop or vegetable with a variation of 1 m between minimum and maximum.
Get the ALPHA evo brochure
See all the information about the ALPHA evo including full specifications, in-depth information and much more!
Your local HARDI dealer
HARDI Dealer network of more than 1500 locations around the world ensures quality, service and spareparts to farmers in more than 100 countries.
Specifications
| Tank, l | 4200 | 5100 |
|---|---|---|
| Pumps, type - l/min | 464/10: 280(540) - 464/12: 334 (540) | 464/10: 280 (540) - 464/12: 334 (540) |
| Booms | ALU, TWIN FORCE | ALU, TWIN FORCE |
| Engine Deitz 6 cyl. 217 hp / 160 kW (Stage IV / Tier 4f / Tier 3a) depending on country regulation | Basis | – |
| Engine Deitz 6 cyl. 245 hp / 180 kW (Stage IV / Tier 4f) depending on country regulation | Optional | Basis |
| Hydrostatic 4-wheel transmission (29 or 40 kph) | EcoDrive Basis | EcoDrive Basis |
| Coil spring suspension | Basis | – |
| Pneumatic suspension FloatRide | Optional | Basis |
| Steering | 4-wheels steering | 4-wheels steering |
| Mechanical track adjustment, cm | Basis, 40 cm slidding range | Basis, 40 cm slidding range |
| Hydraulic Track Adjustment (HTA) - electronic control 1.80 to 2.80 m (only with FloatRide) | Optional | Optional |
| Turning radius 200 cm track width (middle of chassis), cm | 462 | 530 |
| Weight (basis machine, empty)*, kg | 9.470 | 11.600 |
| Weight, front axle, basis machine in transport (empty)*, kg | 5.490 | 6.900 |
| Weight , rear axle, basis machine in transport (empty)*, kg | 3.980 | 4.700 |
| Total length*, m | 9.5 | 10.23 |
| Total height*; cm | 390 | 390 |
| Width with ALU boom (24-44 m), m | 2.55 | 2.55 |
| Width with TWIN FORCE (24 to 30 m), m | 3.00 | 3.00 |
| Width with TWIN FORCE (32 to 36 m), m | 3.34 | 3.34 |
| Track width manual slidding axle** (380/90 R46), cm | 182 - 329 | 182 - 329 |
| Track width HTA axle** (380/90 R46), cm | 180 to 280 | 180 to 280 |
| Wheel base, cm | 370 | 430 |
| Clearance (380/90 R46), cm | 120 | 125 |
| RinseTank, l | 410 | 600 |
| Fuel tank, l | 320 | 400 |
| Filling capacity water, l/min | 490 | 490 |
| Filling capacity TurboFiller, l/min | 120 | 120 |
* Dimension and weight are given for ALPHA evo 36 m TWIN FORCE boom - 380/90 R46 tyres and chassis clearance 120 cm
** Minimum track width is wider with wider tyres (depending on axle type)
Get access to our brochures
by filling out the form below
