COMMANDER

Type

Trailed

Tank Capacity

3300 / 4500 / 5500 / 7000 l

Boom Width

18 - 36 m

Boom Types

DELTA, DELTA FORCE, TERRA FORCE, TWIN FORCE

COMMANDER

Type

Trailed

Tank Capacity

3300 / 4500 / 5500 / 7000 l

Boom Width

18 - 36 m

Boom Types

DELTA, DELTA FORCE, TERRA FORCE, TWIN FORCE

HC 6500

Controller designed for comfort and easy operation
The HC 6500 is designed by HARDI and is designated only for spraying. Multi-purpose computers often compromise on details as they do not have the specifics a sprayer specialist holds.

The more complex a product is, the simpler it should be to use. A confused operator cannot take the full advantage of a complex product. All HARDI intelligent functions can be operated from the HC 6500.

AutoSlant, AutoHeight and AutoTerrain can be mounted together with HC 6500 and operate independently through autonomous control boxes.

commander-electronics-hc6500.jpg

AutoWash

HC 9600 manages the operation to obtain maximum cleaning effect from rinse water. Up to six rinse circles reduce the residual concentration to a very low level, so that after refilling for the next spray job, there is no risk of left over plant production products.

alpha-evo-electronics-autowash.jpg

AutoFill

Ease the tank filling process for the operator

  1. Actual tank content is read on the HC 9600 screen
  2. The operator sets the fill volume from tractor cabin
  3. Operator goes to the work area, connects the hose and starts the job via the FluidBox
  4. The SmartValve closes when the fill volume is reached
alpha-evo-electronics-autofill.jpg

AutoAgitation / TankGauge

Automatic agitation to ensure maximum tank agitation
As the tank empties, the computer regulates the flow to prevent foam, and minimises liquid residues when the tank is empty.
When filling, AutoAgitation ensures maximum Fast- Filler capacity.
Different programmes can be selected for optimal agitation.
A manual override is possible from the FluidBox.
AutoAgitation is a standard feature with AutoFill and/ or AutoWash.

TankGauge
TankGauge is an electronic tank contents sensor which is standard when the COMMANDER has AutoAgitation.

The filling level is measured, and an automatic onscreen tank contents readout is possible. A warning for low tank contents can be set up.

alpha-evo-electronics-autoagitation.jpg

AutoSectionControl

Open and close boom sections automaticly 
AutoSectionControl manages the sections when driving over sprayed area like into a headland or wedge or around obstacles like trees etc.

HC 9600 has AutoSectionControl as a standard feature and only need to be connected to a GPS receiver. When spraying, the AutoSectionControl automatically records the area sprayed. In a typical situation where the headland is sprayed first, AutoSectionControl will now automatically close the sections if the operator passes over a sprayed area.

alpha-evo-electronics-autosectioncontrol.jpg

PrimeFlow

PrimeFlow is a pressure based system for circulation of liquid to the nozzles before the actual spraying starts. It prevents sedimentation and permits flushing the boom lines without spraying onto the ground.

Nozzles per boom section can be freely configured so it exactly complies with the farm practice. If needed, the sections can be reprogrammed at a later stage.

The controls are at the nozzle, and this is ideal for the most effective use of RinseTank water when cleaning the sprayer in the field.

alpha-evo-electronics-primeflow.jpg

BoomPrime

The optional BoomPrime is a low pressure circulation system for DELTA booms. The spray liquid can circulate to the nozzles before the actual spraying starts. It prevents sedimentation and permits flushing of the boom lines without spraying onto the ground.

There will still be liquid running through the boom tubes when the distribution valves are closed. A pressure valve in front of the boom sections ensures that the pressure in the sections will be not higher than 0.7 bar, so the non-drip valves will not open.

This is a much simpler and less vulnerable system compared to a vacuum-based system. Leaks in a vacuum system are difficult to locate and even the slightest leak will cause problems.

commander-electronics-boomprime.jpg

HC 8600 / HC 9600

Touch the future” with integrated electronics – HC 8600/HC 9600 All the main spray functions are at your fingertips. The multi-function joystick in conjunction with the 12.1” touchscreen provides the HC 9600 user with the highest level of performance available.

The HC 8600/HC 9600 controller provides growers with a powerful and full featured precision farming tool. Features include guidance, data logging, application reports, GPS controlled spraying, automated steering and more!

ISOBUS compatibility 
The HC 8600/HC 9600 offers compatibility with the ISO 11783 (ISOBUS) Universal Terminal Standard. So the HC 8600/HC 9600 could also operate as HC 6500.

The complete integration of all important information on one work screen is an important criteria. On the HC 8500/HC 9500 work screen the driver can operate GeoSteer, AutoTerrain/ AutoHeight/AutoSlant, AutoSection- Control, as well as guidance and dosing.

Intuitive touchscreens
A high-definition, 8.4 / 12.1-inch, touchscreen features intuitive tools and real time mapping, including variety map integration so you can view yield results for crop varieties in real time.

HARDI ISOBUS
HARDI NAVIGATOR, COMMANDER, ALPHA evo and SARITOR can be operated with a virtual ISOBUS terminal. The customer can order an intelligent HARDI sprayer and use the intelligent functions like AutoWash and PrimeFlow direct from his own ISOBUS terminal.

alpha-evo-electronics-hc-9600.jpg